Power Transmission & Distribution Automation
Enhancing Electrical Network Efficiency Through Automation and Smart Technologies
Course Schedule
| Date | Venue | Fees (Face-to-Face) |
|---|---|---|
| 06 – 10 Dec 2026 | Riyadh, KSA | USD 3,495 per delegate |
Course Introduction
The power transmission and distribution sector is evolving rapidly with the integration of automation technologies, smart grids, and intelligent control systems. This 5-day intensive training equips participants with the knowledge and practical skills required to implement, operate, and optimize automated transmission and distribution networks, enhancing efficiency, reliability, and safety.
Through a combination of lectures, case studies, and hands-on workshops, participants will gain insights into advanced automation techniques, communication protocols, protection systems, and smart grid applications. The course prepares professionals to manage modern electrical networks effectively, ensuring optimal performance and compliance with international standards.
Course Objectives
By the end of this course, participants will be able to:
- Understand the fundamentals of power transmission and distribution automation.
- Apply automation technologies and smart grid solutions for electrical networks.
- Configure and operate automated protection and control systems.
- Optimize energy distribution and improve network reliability.
- Integrate monitoring, communication, and control systems for network efficiency.
Key Benefits of Attending
- Gain practical knowledge of power system automation and smart grids.
- Learn techniques to enhance network reliability and operational efficiency.
- Understand international standards and best practices in power transmission and distribution.
- Acquire hands-on experience with protection, control, and monitoring systems.
- Network with industry experts and peers in electrical engineering and automation.
Intended Audience
This program is designed for:
- Electrical engineers and technicians in power utilities
- Operations and maintenance managers
- Smart grid and automation specialists
- Protection and control engineers
- Professionals responsible for power transmission and distribution systems
Individual Benefits
Key competencies that will be developed include:
- Knowledge of transmission and distribution automation systems
- Ability to operate and configure protective relays and control systems
- Skills in implementing smart grid and monitoring solutions
- Understanding of network optimization and reliability improvement techniques
- Proficiency in integrating communication protocols and automation technologies
Organization Benefits
Upon completing the training course, participants will demonstrate:
- Improved network reliability, efficiency, and safety
- Optimized power distribution and automated operations
- Enhanced operational monitoring and control capabilities
- Compliance with international electrical standards and best practices
- Strengthened organizational expertise in modern power systems
Instructional Methdology
The course follows a blended learning approach combining theory with practice:
- Strategy Briefings – Overview of transmission and distribution automation principles
- Case Studies – Real-world examples of successful network automation projects
- Workshops – Hands-on exercises with protective relays, control devices, and monitoring systems
- Peer Exchange – Group discussions on challenges and lessons learned in power automation
- Tools – Templates and guides for network monitoring, optimization, and automation implementation
Course Outline
Detailed 5-Day Course Outline
Training Hours: 7:30 AM – 3:30 PM
Daily Format: 3–4 Learning Modules | Coffee breaks: 09:30 & 11:15 | Lunch Buffet: 01:00 – 02:00
Day 1: Fundamentals of Power Transmission & Distribution
Module 1: Overview of Electrical Networks (07:30 – 09:30)
- Transmission and distribution system components
- Network configurations and operational principles
- Introduction to automation technologies
Module 2: Protection and Control Systems (09:45 – 11:15)
- Relay protection principles and devices
- Control systems and automation in electrical networks
Module 3: Communication and Monitoring Protocols (11:30 – 01:00)
- SCADA, IEC 61850, and other communication standards
- Real-time monitoring and control techniques
Module 4: Workshop – Basic Automation (02:00 – 03:30)
- Hands-on exercises in protection and control system configuration
Day 2: Advanced Automation Practices
Module 1: Smart Grid Integration (07:30 – 09:30)
- Smart grid concepts and components
- Integration of distributed energy resources
Module 2: Automation in Distribution Networks (09:45 – 11:15)
- Automated switching and fault detection
- Load management and network optimization
Module 3: Data Acquisition and Control (11:30 – 01:00)
- Monitoring network performance using SCADA
- Data analysis for decision making
Module 4: Workshop – Monitoring & Control (02:00 – 03:30)
- Practical exercises in SCADA and automation systems
Day 3: Protection and Reliability
Module 1: Protection Coordination (07:30 – 09:30)
- Overcurrent, distance, and differential protection schemes
- Coordination of protection devices
Module 2: Fault Detection and Isolation (09:45 – 11:15)
- Techniques for rapid fault detection
- Automation for minimizing downtime
Module 3: Reliability Improvement (11:30 – 01:00)
- Methods to enhance network reliability and resilience
Module 4: Workshop – Fault Simulation (02:00 – 03:30)
- Hands-on exercises in fault detection and protection
Day 4: Network Optimization and Automation Tools
Module 1: Load Flow Analysis (07:30 – 09:30)
- Techniques for power flow analysis and optimization
- Balancing generation and demand
Module 2: Advanced Automation Tools (09:45 – 11:15)
- Software tools for network monitoring and automation
- Decision support for network operators
Module 3: Case Studies in Optimization (11:30 – 01:00)
- Real-world examples of network efficiency improvement
Module 4: Workshop – Optimization Tools (02:00 – 03:30)
- Hands-on exercises in network analysis and optimization
Day 5: Practical Application and Review
Module 1: Integration and Testing (07:30 – 09:30)
- Integrating automation systems into operational networks
- Testing and commissioning procedures
Module 2: Performance Monitoring & KPI Evaluation (09:45 – 11:15)
- Evaluating key performance indicators
- Continuous improvement strategies
Module 3: Review and Certification Preparation (11:30 – 01:00)
- Consolidation of learning points
- Practical scenarios and discussion
Module 4: Workshop and Q&A (02:00 – 03:30)
- Final hands-on exercises and knowledge consolidation
- Feedback and course wrap-up
Certification
Participants will receive a Certificate of Completion in Power Transmission & Distribution Automation, validating their expertise in electrical network automation, monitoring, protection, and smart grid integration for efficient and reliable operations.