Corrosion Control In Gas, Oil & Water

Category: Corrosion Control In Gas, Oil & Water

Course Description

This training course provides a deep knowledge of corrosion and focuses on the examination and identification of metallurgical problems that occurs in process units and methods of monitoring and damage reduction.

The equipment costs are a considerable part of the investment in the petro chemical and water industry, and for long-distance, large-diameter pipelines, they can become prohibitively high if the corrosivity of the fluid necessitates the use of corrosion-resistant alloys instead of carbon steel. Better understanding and control of the corrosion of carbon steel can increase its application range and therefore have a large economic impact. 

Corrosion Control is an essential requirement in Oil & Gas activities. It utilizes application of engineering principles and procedures to minimize corrosion to an acceptable level by the most economical method. It is rarely practical or economical to eliminate corrosion completely and in practice one or more of the following methods would be applied.

Corrosion monitoring Provides an early warning that damaging process or conditions exist which may result in corrosion induced failures. Moreover, it indicates the correlation of changes in process parameters and their effect on system corrosion. Corrosion Monitoring is essential to evaluate the service life of pipelines and to detect when would be the nearest replacement/shutdown.

This training course will feature:

  • Metallurgy and engineering material properties
  • The cost of corrosion damages in industries
  • Proper Corrosion mechanisms related to the oil, gas and water
  • Major Corrosion control and mitigating programs
  • Advanced techniques of corrosion monitoring

Benefit of Attending

At the end of this training course, participants will have learned about:

  • Materials of Construction used in the O&G and water fields
  • Corrosion theories and mechanisms
  • Typical Types of corrosion related to O&G and water fields
  • Corrosion Monitoring and inspection Methods
  • Practical Methods of controlling corrosion

Who Should Attend

This training course is suitable to a wide range of professionals but will greatly benefit:

  • Petroleum Engineers
  • Welding Engineers
  • Process Engineers
  • Inspectors and Inspection Supervisors
  • Equipment Engineers
  • Maintenance Engineers and Planners
  • Design Engineers
  • Service Company Representatives

Course Design

This training course will utilize a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. This includes comprehensive hard and electronic course notes and copies of all presentation material.  Relevant computer simulations and videos will be utilized to help with the understanding of the various topics

Course Outline

  • Metallurgy and Engineering material properties
  • Materials testing (Destructive testing)
  • Material identification according to API 5L and ASME code
  • Economic impacts of corrosion
  • Theory of Corrosion
  • Corrosion rates and ways of measurements
  • Galvanic Corrosion
  • Localized /Pitting Corrosion
  • Corrosion exposed to stray currents
  • Soil Corrosion
  • Crevice Corrosion
  • Microbiologically Induced Corrosion (MIC)

 

Types of Corrosion (Continued)

  • Stress Corrosion Cracking (SCC)
  • Corrosion Under Insulation (CUI)
  • Corrosion under supports (CUS)
  • Flow assisted corrosion (Erosion Corrosion)
  • Cl Stress Corrosion Cracking
  • Intergranular Corrosion
  • Protection by changing design
  • Active Cathodic protection (Sacrifice anode)
  • Cathodic protection (Impressed Current)
  • Passive Protection (Coating)
  • Types of protection paints
  • Inhibitors
  • Thickness measurements using ultrasonic testing
  • Radiographic Examination
  • Corrosion coupons
  • Electrical Probes
  • Intelligent Pigs
  • Exam